
SIX™ back-up sights (BUS) seamlessly integrate into the GUARDIAN Optic Mounting System providing rapid, reliable, and precise target acquisition in scenarios of red dot optic malfunction. Featuring anti-glare, anti-snag and ultra low co-witness design, SIX™ sights lie inconspicuously in wait until you need to deploy them. Like a wingman when things aren't going as planned, SIX™ has your six.
1 - Front Sight
1 - Rear Sight
1 - Rear Sight Screw
1 - Rear Dovetail Filler
1 - Allen Key
1 - Nylon Punch
STEP 01 | Remove the slide. Then remove the guide rod and barrel to access the front sight screw.
STEP 02 | Remove the hex head screw that retains the front sight with a 3/16” front sight tool.
STEP 03 | Place the SIX™ front sight onto the top of the slide with the serrated face facing rearward. Apply a small amount of medium strength thread locker on the hex head screw threads and then install through the bottom of the slide and torque to 5-7 in/lbs using a 3/16” front sight tool.
STEP 04 | Remove rear pistol sight using rear sight pusher.
STEP 05 | Start the dovetail filler into rear sight dovetail. Use the provided nylon punch, gently tap the punch with a hammer until the filler is centered in the middle of the slide.
STEP 06 | Place SIX™ rear sight into dovetail groove at the bottom rear of the optic guard. Using finger pressure, press the rear sight downward until it sits flat against the bottom of the optic guard.
STEP 07 | Grip the provided 1/16” hex key by the short leg to install and torque the SIX™ rear sight screw to 4in/lbs. The taper lock design of the screw makes use of thread locker optional.