Your Cart
  1. There are no products in the cart
TALON 45/90 - 4 LEVER KITAmbidextrous Safety Selector - AR15

The Talon™ 45/90 ambidextrous safety selector is a modular design that can be installed as a standard 90° or as a 45° short throw by simply rotating the shaft 180° inside the lower receiver. Selector levers install using a precision machined dovetail interface with spring-loaded retention stud to lock the lever in place – no screws to come loose or break. The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles as well as MCX and MPX platforms.


Patent Number: US9557128

Designed & Manufactured in the USA


4-Lever Combo: Short, Medium, Medium Taper, & Long

Levers Machined from Billet aircraft grade aluminum w Milspec Type 3 Hard Coat Anodized Finish or Cerakote

Center Shaft Machined from Hardened Steel w/ Black Nitride Finish

$94.95

More Details

WHAT'S INCLUDED

1 - TALON Cylinder

1 - Short Lever

1 - Long Lever

1 - Medium Lever

1 - Medium Tapered Lever

2 - TALON Spring & Detents

1 - Talon Tool

1 - Safety Selector Detent

1 - Safety Selector Detent Spring

INSTALLATION INSTRUCTIONS

STEP 01 | Remove the grip and old safety.

STEP 02 | Apply a light coating of oil to the Talon cylinder and insert into the lower receiver so the detent groove in the shaft lines with the safety detent hole.

STEP 03 | Drop the supplied safety detent into the lower receiver and place the supplied safety detent spring into the grip. Install and tighten the grip.

STEP 04 | Snap the small spring included in the parts kit onto the shorter end of the retention stud.

STEP 05 | Insert the spring loaded retention stud into the hole at the end of the cylinder, spring end first.

STEP 06 | Using the supplied Talon installation tool, depress the spring loaded retention stud while sliding the lever onto the dovetail. The retention stud will snap into place securing the lever.

Repeat Steps 04-06 for the second lever to complete installation.



HOW TO SWITCH THROW CONFIGURATION

STEP 01 | Loosen the grip just enough to rotate the entire safety unit 180°, then tighten grip.

STEP 02 | Remove the levers using the supplied installation tool, then reinstall the levers in the correct orientation.

Compatibility

The Talon is compatible with most semi-automatic AR15 & AR10/SR25-pattern rifles as well as MCX and MPX platforms.

Cage Code

8BMX3

Product Reviews